WiFi QR Code Generator

Make a code guests scan to join your Wi-Fi with this free WiFi QR code generator. Print it as a sign, table tent or cards; your password stays on your device.

Security

Not sure? Pick WPA/WPA2/WPA3 — almost every router uses it. WPA3 networks use this setting too.

Print layout

Changing your Wi-Fi password makes the printed code stop working — reprint it.

Print at 100 % (Actual size). Check the QR’s black square measures the size shown, 90 mm on a sign or 60 mm on a tent.

Print preview

Already have a Wi-Fi QR code? Load a screenshot and we’ll fill the form. The image is read on your device.

Everything runs in your browser. Nothing you type is uploaded.

How to make a WiFi QR code

Type the network name exactly as the router broadcasts it. Case matters, and so do spaces at the beginning or end. Choose the security type: WPA/WPA2/WPA3 for almost every home and café router, WEP only for an old device, or None for an open network. Then enter the password.

The preview updates as you type, and the payload box shows the text that will be stored inside the QR code. When the tool says the test scan is OK, the code has been decoded again on your device and compared with the payload. Choose Sign, Table tent or Cards, download the PDF, and print at 100 percent.

Before you put the sign up, scan it with a real phone. Use the same phone model your guests are likely to carry, stand where they will stand, and check that the phone offers the right network. A code that scans at the desk may fail in a dim corner or behind glass.

The Sign layout is a single page with a large QR code, the network name and an optional password line. It suits a framed notice by the counter, a wall by the door or a noticeboard in a waiting room. The default QR is 90 mm square, large enough to scan from a comfortable distance.

The Table tent folds in half and stands on a table. Both halves are printed upright, and a dashed fold line marks the middle. Use cardstock and score the fold with a ruler and a dull knife so the paper bends cleanly instead of cracking.

The Cards layout puts ten small cards on a Letter sheet, or ten on A4, with crop marks for cutting. The password is off by default because a card is easy to pick up and take away. Put the cards in rooms, on tables or in welcome packs; print more when they run out.

For all three layouts, check the printed size before a large run. On the sign the black QR square should measure the size shown in the preview, usually 90 mm. On a card, measure between the crop marks and compare with the dimensions in the note under the preview. If the print is smaller, the printer is scaling the page; turn off “Fit to page”.

Which security type should you pick?

WPA/WPA2/WPA3 is the correct choice for nearly every router made in the last fifteen years. The QR payload uses the label WPA, and current phones treat it as compatible with WPA2 and WPA3 personal networks. If your router offers WPA3-only mode and an older guest phone cannot join, a separate WPA2 guest network is usually the simplest fix.

WEP is obsolete and easy to break. Use it only if an old device leaves you no choice, and do not treat a WEP network as private. None means the network is open; the code joins it without a password, which is convenient for a waiting room but offers no protection.

Networks that ask for a username and password, such as enterprise 802.1X networks, are not supported by the standard Wi-Fi QR payload. Guests will need the normal sign-in instructions for those networks.

Does it work on iPhone and Android?

Current iPhone and Android camera apps recognize the WIFI: payload and offer to join the network. The guest points the camera at the code, taps the notification and confirms. No app is required on most devices from the last several years.

Older Android phones and some in-app browsers may not recognise the payload. A QR scanner app that understands Wi-Fi codes is a workaround. If your guests are a mix of old and new devices, print the network name and password in plain text next to the code as a fallback.

The code does not connect anyone automatically. It only offers the network details; the guest still taps to join. That is a useful safety feature, because a code cannot silently add a device to your network.

Keep your network safe

Anyone who can see the sign can read the password. Treat a Wi-Fi QR code like a password written on a card. For a business, put guests on a separate guest network with its own password and, where the router supports it, client isolation. Do not print the code for the network that runs your till, cameras or office computers.

Reprint the sign whenever the password changes. A code taped to a wall can stay there for years; make a note to replace it at the same time as the router settings. Do not face a sign toward a street-facing window where it can be photographed from outside.

This tool never uploads the password and never puts it in a share link. The password is stored on your device only if you tick Remember password, and Clear my data removes it. The PDF metadata contains the network name and layout, not the password.

How the WIFI: text inside the code works

A Wi-Fi QR code is plain text in a documented format. It starts with WIFI: and then lists fields separated by semicolons: T for security, S for the network name, P for the password and H for hidden. The payload for a typical café network looks like WIFI:T:WPA;S:CafeGuest;P:sunny-day-2026;;.

Special characters in a name or password are escaped with a backslash, so a semicolon inside a network name does not break the field order. The self-test decodes the rendered image and compares the result with the payload, which catches escaping mistakes before you print.

Because the payload is static, there is no account, redirect or expiry. The code works offline and cannot be changed remotely. If the network changes, the old code simply stops matching.

Import an existing QR code

If your router or phone already displays a Wi-Fi QR code, you can reuse it. Choose Import from a QR image, select a screenshot, and the tool decodes it on your device, fills the form and checks the details. This is handy when a router’s admin page shows a code but not the password in an easy-to-copy form.

The image is read locally and then discarded; nothing is uploaded. If the screenshot contains a QR code that is not a Wi-Fi payload, the tool says so instead of guessing. Check the imported network name and security type before printing, especially if the screenshot came from a different router.

Paper, sizes and finishing

Letter and A4 are both supported. The QR size is adjustable from 25 mm to 140 mm on the sign, and from 25 mm to 100 mm on the table tent. Cards use a fixed size that fits the card. Larger codes scan from farther away; smaller codes suit a card held in the hand.

A matt laser print is easier to scan than a glossy inkjet print under bright lights. If you laminate the sign, avoid a highly reflective pouch. Keep the white margin around the QR code clear; the quiet zone is part of the symbol even though it looks empty.

For a professional result, trim the cards on the crop marks and score the tent before folding. Use the printed size note to confirm the scale, and keep a spare copy behind the counter for the day the original is damaged.

Updated:

Frequently asked questions

How do I generate a QR code for my Wi-Fi?

Type the network name exactly as it appears on your router, choose the security type, and enter the password. When the test scan says OK, pick a layout and download the PDF. Print at 100 percent and scan it with a phone before putting it up.

Are WiFi QR code generators safe?

This one runs entirely in your browser. The password is never uploaded and never placed in a share link. The printed code itself does reveal the password to anyone who scans it, so use a guest network for visitors.

Do WiFi QR codes work on iPhone and Android?

The camera app on current iPhone and Android versions recognizes the standard WIFI payload and offers to join. Older phones may need a QR scanner app. Test the printed code with the devices your guests actually use.

What happens if I change my Wi-Fi password?

A printed code contains the old password and stops working. Change the router password first, then regenerate and reprint the sign, tent or cards. Keep a note to replace any code taped to a wall or table.

Does the code expire?

No. The QR code is a static piece of text, not a redirect or a subscription. It keeps working as long as the network name, security type and password stay the same. There is no server that can switch it off.

Can I connect to a hidden network?

Yes. Tick Hidden network so the code includes the hidden flag. The phone must still be within range, and some older devices handle hidden networks poorly. Test before relying on it for guests.

Does it work with WPA3?

Wi-Fi QR codes use the WPA security type for WPA2 and WPA3 personal networks. Choose WPA/WPA2/WPA3 for a modern router. Enterprise networks that ask for a username are not supported by this format.

Why won't my phone join the network?

Check the exact spelling and capitalisation of the network name, the security type and the password. Make sure the guest is in range. Some venues also show a sign-in page after joining, which the QR code cannot bypass.