How to print polar graph paper in four steps
- Set the ring spacing. Ring spacing offers 5 mm, 1/4 in, 1 cm and 1/2 in, plus a custom value from 2 to 40 mm. The tool calculates how many whole rings fit inside the margins.
- Choose the bold rings. Bold rings every sets a heavier ring every 2, 4, 5 or 10 rings, or turns the emphasis off. The outer ring stays bold. Numbered rings count groups of five when the interval is five.
- Pick the angle step. Angle lines offers 5, 10, 15, 30 and 45 degrees. The axes at right angles are drawn in the bold colour. Rays are kept clear of the centre so the pole remains readable.
- Choose labels and print. Labels can be degrees, radians or off. Download the PDF and print at 100 %.
Reading the grid
The centre of the circle is the pole. The right-hand horizontal axis is 0 degrees, and angles increase counter-clockwise. A ray at 90 degrees points up, 180 points left and 270 points down. A point is named by its radius and angle, so the same location can be written as 20 mm at 30 degrees or as a pair in your chosen unit.
The rings are equal steps of radius. If the spacing is 5 mm, the first ring is 5 mm from the centre, the second is 10 mm, and the outermost ring is the largest whole step that fits. On Letter with half-inch margins, 17 rings fit and the outer radius is 85 mm. On A4 with 10 mm margins, 17 rings also fit at 5 mm.
| Ring spacing | Letter / A4 | A3 | 11 × 17 |
|---|---|---|---|
| 5 mm | 17 rings | 26 rings | 24 rings |
| 1/4 in (6.35 mm) | 14 rings | 20 rings | 19 rings |
| 1 cm | 8 rings | 13 rings | 12 rings |
| 1/2 in (12.7 mm) | 7 rings | 10 rings | 9 rings |
Degrees or radians?
Degrees are easier for practical work. A compass bearing of 30 degrees, a roof pitch or a workshop angle maps directly onto the labelled ray. The degree labels run from 0 to 330 in 30-degree steps, so every second ray at a 15-degree setting is labelled.
Radians are better for mathematics. A full turn is 2 pi, a half turn is pi, and a quarter turn is pi/2. The radian labels use pi fractions: 0, pi/6, pi/3, pi/2, 2pi/3 and so on. They are printed as text, so the PDF does not need a special font file. If you are plotting a polar curve, radians keep the formula and the labels in the same language.
Bold rings and numbering
A page with every ring the same weight is hard to count. The bold-ring setting adds a heavier circle at a regular interval. With the default every five, rings 5, 10 and 15 are heavier, and the numbers 1, 2 and 3 mark them along the right-hand axis. Each number is a group of five rings, so ring 10 is 2 and ring 15 is 3.
The outer ring is always bold because it marks the edge of the plotting area. If the major interval does not divide the total number of rings, the outer ring is still emphasised, and the numbering stops at the last complete group. Turning bold rings off keeps the outer ring bold but removes the numbers, which gives a cleaner page for a finished diagram.
Uses for polar paper
Polar paper is useful in maths lessons for plotting r = 2 sin theta, r = 1 + cos theta and rose curves. In navigation and outdoor work it can sketch a bearing and distance from a fixed point. In design it helps lay out radial patterns, clock faces, dials and circular logos. In a workshop it can mark holes on a flange when the positions are given by angle and radius.
For a quick sketch, 15-degree rays and 5 mm rings are enough. For a precise plot, use 5-degree rays and a finer ring spacing. For a teaching page, 30-degree rays with labels in degrees are easier to read from the back of a room. The preview updates as you change the settings, so you can check the label density before printing.
Paper, margins and the circle
Letter is the default for US and Canadian users; A4 is the default elsewhere. The circle uses the shorter usable side, so portrait and landscape give the same radius. A3 and Tabloid give a larger circle for a class or a wall chart. The default margins are 0.5 in on US paper and 10 mm on A4.
The label reserve is part of the layout. Turning labels off does not make the circle larger, so a page printed with labels off still matches a page printed with labels on. That makes it easy to print one version for a display and another for working notes.
Print it right
- Print at 100 % (Actual size), not Fit.
- Choose the paper that matches the tray.
- Print one page and measure the test line before printing a set.
The test line should measure 2 in on US paper or 50 mm on A4. If it is wrong, the rings will be the wrong size. Open Printing tips for browser scale settings.
Tips and limits
Keep the ring spacing between 2 and 40 mm. A ring below 2 mm is too dense for most printers, and a ring above 40 mm may leave only one or two rings on the page. Choose a custom spacing that divides the usable radius if you want the outer ring to land on a whole number.
The tool does not plot functions, draw compass bearings or add a title. It prints the grid; you add the data. The PDF is vector, so the circles stay smooth at any print size. Nothing is uploaded, and a share link rebuilds the same grid for a colleague.
Updated: