Make the words do the work
A sign is read in a second or two, usually from a moving car. That changes what belongs on it. The main word should be short and unmistakable: SALE, OPEN, FREE, ESTATE SALE. The next lines carry the practical details — the day, the hours, the street or a landmark. The arrow tells the driver which way to turn. Anything else competes with those four things.
This sign maker starts with that order in mind. The first line gets the largest fitted size, later lines are capped so they cannot grow past the headline, and the whole stack is reduced only when it would otherwise run off the page. Type a long address and the letters get smaller instead of being clipped. That is why the preview is worth watching while you type: it shows the exact page that the PDF will contain.
Choose a preset for the common jobs: yard sale, garage sale, estate sale, moving sale, open, closed, back in 15 minutes, a percentage-off sale, for sale or for rent with tear-off tabs, free — please take, cash only, welcome and party — this way. Presets only fill the fields. Every line, weight, size, colour and arrow can be changed afterwards. There are no safety, parking or official-looking templates in the list, and the tool does not invent legal wording.
Set the size for the distance
The rule of thumb for a printed sign is ten feet of reading distance per inch of capital-letter height. Practically, that means 25 mm capitals for a sign beside a quiet road, 50 mm for a busy road, and 100 mm or more for a sign that must be understood from a junction. The line under the preview estimates both a comfortable distance and a maximum distance using the letters actually fitted on the page.
Colour matters as much as size. Black on yellow is the classic yard sale combination because it holds up in daylight and photocopies well. White on red or white on green is punchy but uses a lot of ink. The ink-saver theme outlines the letter shapes, and the bright-paper theme assumes you have loaded fluorescent stock and will print black only. For custom colours, the contrast readout warns you when text and paper are too close in tone. A 3:1 ratio is the minimum for very large text; 4.5:1 is a safer target.
Paper choice is simple. US Letter and A4 both work in a home printer. Portrait gives you more height for a tear-off strip; landscape gives more width for a long word and a side arrow. The PDF keeps the chosen size, so do not let the print dialog substitute another paper size.
One big sign from several sheets
A single sheet is fine at the end of a driveway, but a sign for the start of a street needs bigger letters. Tiling solves that without a large-format printer. Turn on tiling, choose the columns and rows, and set an overlap of about 5 mm. The tool lays the same fitted text over a virtual page, then crops that page into printable tiles with crop marks and a faint overlap guide.
Print all tiles at 100 percent. Trim each sheet to the dashed line on the right and bottom edges, then line up the overlap guide and tape the back. A 2 × 2 grid on Letter paper gives a sign roughly 406 × 508 mm; a 3 × 2 grid is wider again. The page count under the preview tells you how many sheets to load, and the test print checks that the printer is not shrinking the page.
Tiling is text-only. Arrows and tear-off tabs are designed for a single sheet, so the tool leaves them off when tiling is on. If you need a large arrow, print the arrow-only preset on one sheet and tape it beside the tiled words.
Printing, mounting and reuse
Download the PDF and print at 100 percent or Actual size. On plain paper, a laser print is more water-resistant than an inkjet print. For a rainy weekend, put the sheet in a clear plastic sleeve, tape all four edges, and mount it on a board rather than taping the paper directly to a post. Two small holes at the top and a couple of zip ties make a sign that does not flap.
Before a big run, print the test page. Its ruler must measure 100 mm in real life. If it measures less, the driver is fitting the page to the paper and every sign will be slightly small. The same rule applies when you print several copies: each copy is a separate page in the PDF, so one print job can cover both sides of the street.
The share link stores the wording, colours, arrow and paper choice in the address, not on a server. Open it on another device to continue editing, or keep the PDF as the final copy. If you opt in to saving on the device, the sign is stored in this browser only; the Clear my data button removes it.
Updated: