Poster Printer: Print a Large Image on Multiple Pages

Turn one image into a wall poster made of ordinary sheets — a sharp photo or rasterbator-style halftone dots, with overlap, crop marks and an assembly map.

Your image

Drag and drop or paste an image. Your image stays on this device. It is never uploaded.

Try a sample:

No image yet.

Size

Pages wide + Auto is always portrait. The height follows your image.

Paper and tiling
Look

Poster preview

No image

Add an image to see pages and size.

Tile

How to print a large image on multiple pages

Set Pages wide or Exact size, pick the printer’s paper and print the test page once. Then:

  1. Choose image or paste it.
  2. Set the size.
  3. Select paper.
  4. Choose Photo or Halftone dots.
  5. Check the 100 mm line.
  6. Make the PDF and print at 100 percent.

A 12-megapixel photo four pages wide on Letter is about 31.4 × 23.6 inches from 12 sheets, plus a map page.

Wall posters, cutouts and event backdrops

A landscape, a permitted band photo or a pet portrait becomes a poster in an evening with a home printer and tape. Four sheets wide is a gentle start; six is a statement.

Exact size suits objects: type 170 cm for a life-size cutout and the width follows. For lettering, use the Sign Maker; for a planning grid, print graph paper.

Choose the poster size: pages wide or exact size

With 5 mm overlap, width is the sheet count times printable width minus the overlap counted twice. Letter from two to six pages wide: 401, 600, 798, 996 and 1,194 mm; A4: 391, 584, 777, 970 and 1,163 mm. Height follows the image.

Pages wide Letter A4
2 401 mm 391 mm
3 600 mm 584 mm
4 798 mm 777 mm
5 996 mm 970 mm
6 1,194 mm 1,163 mm

Exact size takes width, height or both; the other side follows the image. Auto keeps the orientation with fewer sheets, and Save pages drops a thin last strip.

Photo or halftone dots — which looks better?

Photo mode suits a sharp image seen closely; each sheet is drawn at up to 300 dpi, never above the file. Halftone mode suits small files, huge posters and the bold rasterbator-style look. Dots are vector circles, so edges stay clean.

Dot size follows darkness; 10 mm is the default. Black is classic, one colour suits a room, and multicolour keeps the photo’s colours.

Overlap, printer margins and crop marks

Printers cannot reach the edge. The printer margin is the strip they miss, usually 6 mm. Print the test page, find the smallest tick that prints fully on each edge, and enter the largest.

Overlap prints on both neighbours; 5 mm suits most printers, and 10–15 mm is easier on a big poster. Crop marks and labels such as A1 and B1 help alignment.

How this poster printer works

Pages step by printable page size minus overlap, and every tile uses the same scale. In halftone mode each cell becomes a circle: radius is half the spacing times the square root of darkness times the maximum size. No AI, no upscaling.

The same tiling idea plans box templates and pumpkin carving templates. Rasterbator is the name of another, independent tool; PrintableMate is not affiliated with it. We use ‘rasterbator-style’ to describe the halftone-dot poster look.

Your image never leaves your device

The image is decoded in this tab and not uploaded. Only settings are stored; Start over removes the image and Clear my data removes settings.

Will my image be sharp enough?

Sharpness is pixels divided by printed inches. A 4032-pixel photo stays Good to about 40 inches or 102 cm. The meter uses the shorter side.

Sharpness DPI Meaning
Good 100+ Crisp at normal viewing distance
May look soft 50–99 Fine across a room, soft close up
Will look blocky below 50 Visible pixels; shrink it or use dots

Use the largest original; chat apps shrink photos. If it says soft, use fewer pages wide, a smaller exact size or halftone dots. For a mounting grid, print graph paper.

Choose 100 percent or Actual size. Turn off Fit to page, Scale to fit and the printer’s poster mode; the PDF is tiled. Use the same paper and turn borderless printing off. The test page’s 100 mm line must measure 100 mm.

Print every tile, trim the white margin and overlap strip, and work in rows: place a sheet’s trimmed right edge on the dashed line to its right, then the row’s bottom edge on the line below. Tape on the back and mount on foam board.

Limits are 100 pages, a 100-megapixel image on desktop (40 on a phone) and the formats your browser opens. For a wall calendar, the printable calendar uses the same exact-page approach.

Updated:

Frequently asked questions

How do I print a large image on multiple pages?

Choose an image, set Pages wide or an exact size, pick paper and mode, and print the test page. Make the PDF, print every sheet at 100 percent, then trim the crop marks and tape the tiles using the labels and map.

What is a rasterbator-style poster?

A large picture rebuilt from a grid of dots that grow with the darkness underneath. Dark areas get big dots, pale areas small ones, so the picture appears from a few steps away. Choose Halftone dots and 10 mm spacing.

How many pages will my poster need?

The summary shows the grid and page count. A 12-megapixel photo four pages wide on Letter is 12 sheets plus a map. A 24 × 36 in poster is 15 Letter sheets; A1 is 12 A4 sheets, or 9 with Save pages.

Why does my poster look pixelated or blurry?

Too few pixels for the size. The meter turns the image into dots per inch: 100 or more is Good, 50–99 soft, below 50 blocky. Make the poster smaller, use the original file, or switch to halftone dots.

Can I make a life-size cardboard cutout?

Yes. Choose Exact size, type 170 cm and the width follows the photo. A 12-megapixel portrait gives about 60 dpi: soft close up, fine across a room. Glue the sheets to cardboard and cut the outline.

Does it work on iPhone, Android, Mac and Windows?

It runs in any current browser, including iPhone Safari and Android Chrome. Phones reduce images above 40 megapixels. Choose image rather than paste on iPhone, then print from your PDF viewer.

Is it free, and is my photo uploaded?

It is free, with no sign-up or paid tier. The image is decoded in this tab, never uploaded, and only settings are saved. Print pictures you took or have permission to use.

Is this the original Rasterbator?

No. Rasterbator is the name of another, independent tool; PrintableMate is not affiliated with it. We use 'rasterbator-style' to describe the halftone-dot poster look. This tool adds photo mode, exact sizes and a map.