How to print blank sheet music in four steps
- Choose the layout. Layout offers Single staves, Grand staff (piano) and TAB (guitar). Single staves suit melodies, exercises and lead sheets. Grand staff pairs treble and bass for piano. TAB prints six guitar lines.
- Set the count and size. Staves runs from 6 to 14, and Staff height offers 7, 8, 9 and 10 mm plus a custom value from 5 to 14 mm. The default is 12 staves at 8 mm, which leaves comfortable gaps for lyrics and annotations.
- Add clefs, measures and a title. Clef can be none, treble, bass, or treble and bass for a grand staff. Bar lines (measures) adds up to six equal measures. Title area gives page 1 a heading band for a title and composer.
- Download and print. Use Test print first if you are checking a new printer, then Download PDF at 100 %.
How the staves are spaced
The tool calculates the usable height from the paper, the top and bottom margins, and any title area. For single staves, it divides the leftover height into equal gaps between staves. The gap is never smaller than one staff height, so there is room for ledger lines, stems and lyrics. If the requested count cannot fit, the tool names the maximum that does.
A grand staff uses a system height of 3.5 staff heights: one staff, a gap of 1.5 staff heights, and a second staff. The gap between systems is calculated separately, so the brace and the system bar line always align. TAB uses a staff height of five line spaces; its gap has a 6 mm minimum, which keeps chord diagrams and rhythm marks from colliding.
The exact gaps are printed in the summary, so you can compare a Letter page at 13.9 mm between staves with an A4 page at 15.5 mm. The difference is small but useful when you are choosing paper for a long piece.
Single staves, grand staff and TAB
Single staves are the most flexible. Use them for a melody, a scale exercise, a transcription or a lead sheet with chord symbols above the staff. Twelve staves at 8 mm leave enough room to write a title, a tempo and a few notes between systems without feeling cramped.
Grand staff is for piano and keyboard music. The treble staff sits above the bass staff, joined by a brace and a system bar line. Clefs are placed on the correct lines: treble on the G line and bass on the F line. Measures run through both staves. A 12-stave grand staff gives six systems, which is a practical page for a short piece or a lesson.
TAB is for guitar. The six lines represent the strings, and the stacked T, A, B letters mark the system. Use 3 mm spacing for a compact page; a custom value up to 6 mm gives more room for chord diagrams. TAB does not use a clef, and the clef control is disabled on this layout.
Clefs, measures and the title area
Clefs are vector shapes, not images, so they stay sharp in print. A treble clef is placed at the left of the staff with the curl around the G line. A bass clef sits with its dots around the F line. The grand staff combines both. The clef area is 1.5 staff heights wide, so the first measure starts after it.
Measures divide the staff into equal bars. Choose 0 for open staves, or 1 to 6 for a fixed bar count. Bar lines are heavier than staff lines and run from the top line to the bottom line; on a grand staff they span the pair. A final bar line closes the last measure.
The title area is a 20 mm band on page 1. The title is centred at 16 pt, and the composer name is right-aligned at 10 pt. Leave either field empty if you prefer to write it. Pages 2 and later do not reserve the band, so they hold the same number of staves as a page without a title area.
Paper, margins and staff size
Letter is the default for US and Canadian users, A4 elsewhere, and both fit 12 staves at 8 mm with 15 mm margins. If you print on A5 or B5, expect fewer staves or a smaller staff height. The fit message gives the maximum for the current paper, count and size, so you can adjust one value instead of guessing.
For a three-ring binder, 15 mm margins leave room for holes but not much else. Check the first staff against the hole punch before printing a batch. For a folder or a music stand, a larger side margin can keep the music clear of a clip. The PDF does not add a page border, so the printed page stays clean.
Print it right
- Print the PDF at 100 % (Actual size), not Fit.
- Choose Letter or A4 to match the tray.
- Print the test page and measure the line before printing the piece.
The test line should measure exactly 2 in on US paper or 50 mm on A4. If it is wrong, the staff height will be wrong too. Open Printing tips for browser-specific scale settings.
Tips and limits
Start with 12 staves at 8 mm for handwriting. If you need to add lyrics, choose 10 staves so each system has more room. For a lead sheet, 8 to 10 staves with a treble clef and four measures is a practical layout. For a piano piece, six grand-staff systems fit a page at the default size.
The tool does not add key signatures, time signatures, notes or chord diagrams. It prints the blank structure; you add the music by hand or in a notation app. The PDF title records the layout, count and staff height, which helps when several versions are saved in the same folder. Nothing is uploaded, and a share link rebuilds the same page.
Updated: