Start with the holder, not the design
Name tags fail for a boring reason: the sheet does not match the holder. Before choosing a layout, look at what you already have. A clear horizontal sleeve usually takes a 4 × 3 inch insert. A portrait sleeve takes the same insert turned ninety degrees. A roll of adhesive labels has its own count, width and height printed on the backing sheet. A badge on a lanyard may be A6 or A7 rather than a US inch size.
The layout menu names both the card size and the sheet: how many fit on Letter or A4, and whether the page is a cut-out sheet, a pre-cut sheet or a set of cut guides. Pick the closest match, then use the test print. That page draws orange outlines around every tag at the exact PDF coordinates. Place it over the real sheet at a bright window; if the outlines sit inside the die-cuts, the PDF will line up.
Two ways to fill the tags
The simplest method is one name per line. Type or paste the list, and each line becomes a badge. That is enough for a workshop, a team lunch or a family gathering. The tool splits the line into a first name and a last name, then makes the first name the dominant element and prints the rest smaller underneath. A checkbox lets you treat the first word as the first name when your list is in Western order.
For a larger event, paste a CSV. If the first row contains headings, the maker maps them automatically. Supported headings include first, last, name, role, company, pronouns, table and group. A row with a full name but no separate first-name column is split for you. Empty rows and rows without a name are skipped, duplicates are counted, and the list is capped at 2,000 badges so the browser stays responsive.
The output is not just a name. The Conference style uses the event band for the event name and date, then prints the role, company, table or pronouns in smaller type. The Corporate style colours the bottom rule and can use the company as its band. The Hello style follows the familiar peel-and-stick format. The Minimal style keeps a thin accent rule, and the Bold style puts the first name alone at the largest possible size.
Make the first name readable
Badges are read from a few steps away, often in poor light. The first name should be the largest thing on the card after the event band, and it should not be squeezed into a corner. This maker fits the name to the available width and height rather than using one fixed font size for every tag. Short names grow; long names are reduced, then wrapped, then shortened only as a last resort.
Group colour is a quiet but useful signal. If the CSV has a team, ticket type or category column, each new group gets its own accent from a fixed palette. The colour appears in the band or rule, not across the whole card, so the name stays black on white and easy to read. Colour is never the only clue: the group value can also print on the tag.
Paper, cutting and assembly
Print at 100 percent or Actual size. Adhesive sheets are unforgiving: a two-percent shrink is enough to put the bottom row outside its die-cuts. Use the printer’s plain-paper setting for paper labels and its thick-paper or label setting for heavier stock, and check the manual for the correct feed path. Let the sheet cool for a moment before touching the printed surface.
For insert cards, cut on the guides with a trimmer for a straight edge, then slide the card into the sleeve. For adhesive tags, peel only the tag you need if the sheet allows it. For a lanyard badge, punch a slot or use the holder’s clip rather than punching a hole through the printed name.
The guest list stays in this browser. Nothing is uploaded. If you turn on remembering on this device, the list is stored locally and the Clear my data button removes it. A share link puts the list and settings in the address, so only send it to people who should see those names.
Updated: