Printable Raffle Tickets

Make printable raffle tickets with numbered tear-off stubs for door prizes, event entry or coat check — 8 or 10 per page, ready as a PDF in seconds.

Start with a preset
Ticket type
Ticket text

1–60 characters. The title shrinks before it is cut short.

Stub fields

No fields? The stub prints the number only, centred. Narrow stubs rotate automatically.

Numbering
Cutting order

Cut and stack makes each pile count in order after you cut the sheets. Page by page fills 1–8 on page 1.

Layout and design
Print guide
  • Paper: US Letter (or A4) to match the PDF.
  • Scale 100 % / Actual size, never “Fit to page”.
  • On the test print, the 100 mm ruler must measure 100 mm.
  • Cardstock: use the printer’s thick-paper setting.

Add an event title to enable the PDF.

Ticket preview

0001–0080

Tickets 0001 to 0080 on 10 pages; 8 stacks of 10.

Stack 1 = 0001–0010, Stack 2 = 0011–0020 … Stack 8 = 0071–0080

Whole page

80 tickets · 10 sheets of US Letter (8 per sheet)
Page 1 of 10

Page 1: 0001, 0011 …

Print at 100 % (Actual size). Paper size in the PDF: US Letter.

How to make printable raffle tickets in 4 steps

Start with the event, not the design. Type the event title, then add the organiser, prize or description, date and time, and venue. Choose whether the ticket needs a tear-off stub. A raffle ticket with a stub gives you two matching numbers: one stays with the buyer and one goes into the box. An admission ticket can be one piece, with no stub, which is useful for a headcount at the door.

Next, set the numbering. The start number defaults to 1, the count to 80 and the step to 1. Zero padding of 4 turns 1 into 0001 and keeps every ticket the same width. A prefix or suffix such as A- or -R helps if you print several books for different sellers. If last year’s book ended at 0250, start this one at 0251.

Then choose a layout and design. Eight per page gives a taller ticket; ten per page uses less paper. Classic, Modern, Minimal, Party and Baby shower are included. Pick an accent colour and a light background tint if you want one. The preview shows a large ticket and the whole page, so you can check that the title and the number both fit before you print.

Finally, download the PDF and print at 100 percent or Actual size. Cut along the lines. If you chose cut-and-stack, sort the cut piles using the stack summary. Each pile should count in order, which makes it easy to hand out tickets in sequence or to keep one pile per seller.

Raffle ticket template layouts: 8 or 10 per page

The 8-up layout is the comfortable choice. Each ticket has room for a two-line title, a prize line, a draw line and a small-print line, with a stub wide enough for a name and phone number. On US Letter the tickets are 4 × 2.625 inches; on A4 they are 100 × 70 mm. The page margins are set so a home printer can handle the sheet without clipping the edge tickets.

The 10-up layout suits larger runs. Tickets are shorter, so the title may shrink and the stub has less room. It is a good fit for event entry or coat check, where the number matters more than a long description. The PDF still uses the full page, and the cut lines stay in the same place on every sheet.

All four layouts — Letter 8-up, Letter 10-up, A4 8-up and A4 10-up — are built into the page. The default follows your browser language: US English starts on Letter 8-up, other languages start on A4 8-up. You can change it at any time before printing. The page size in the PDF is the paper size you choose, so do not let the print dialog shrink it to fit a different paper.

Numbered tickets that stay in order after cutting

The numbering order is the part most ticket templates leave out. With page-by-page numbering, page 1 runs 1 to 8, page 2 runs 9 to 16, and so on. That is easy to understand, but after you cut three sheets and mix the piles, the numbers are scattered.

Cut-and-stack numbering is designed for cutting first and sorting second. Each position on the sheet becomes a stack. With 80 tickets on an 8-up layout and 10 sheets, stack 1 runs 0001–0010, stack 2 runs 0011–0020, and the last stack runs 0071–0080. After cutting, each pile is already in order. If the count does not divide evenly, the last stack has a few blank positions; the tool shows “(+4 blank)” so you know what to expect.

The numbering panel also supports a step larger than 1, a prefix, a suffix, and printing the number twice on the ticket — once at the top right and once at the bottom right. Numbering twice is handy for coat check, where the number should be visible without turning the ticket over. The stub always carries the same number string as the main ticket.

What to print on the ticket and the stub

A useful event ticket answers four questions: what is this, who is running it, when is the draw or entry, and what should the holder do? The event title covers the first. The organiser field and the small print share the last line, while the date and time plus the venue form the draw line. The prize or description is the middle line, and the extra line can hold a short instruction such as “Keep this half”.

The stub is for information you need later. Name and phone are switched on by default because they are the most common way to contact a winner. Email and address can be added if your event needs them. If the stub becomes too narrow for four fields, the layout drops Address first and then Email, with a warning, rather than printing unreadable overlapping lines. With no fields selected, the stub shows only the number, centred and bold.

Keep the wording plain. A ticket is read at a door, often in poor light, so a short title and a large number work harder than a paragraph. The small print is the place for a short condition or a thank-you, not for the full rules. If your event needs terms, print them on a separate sheet or the back of the ticket, and check the wording against your local rules.

Paper, cutting and perforating tips

For a small run, 65 lb cover or 176 gsm cardstock is stiff enough to feel like a ticket and still feeds through most home printers. Thicker stock may need the rear feed. Set the printer to its thick-paper or cardstock mode and print one test sheet before the run. The test print in this tool includes a 100 mm ruler on A4 and a 4-inch ruler on Letter paper; if the ruler is short, the printer is scaling the page.

Cut with a rotary trimmer or a guillotine for straight lines. Scissors are fine for a dozen tickets, but a trimmer is faster and the stacks line up. Cut along the dashed cut lines, not through the ticket border. If you want tear-off stubs, perforate the divider before cutting the sheets apart; a sewing machine with no thread, a perforating tool or a craft knife against a ruler all work. Printing on perforated cardstock is another option if your printer handles it.

Colour costs ink. A light tint and a coloured accent use less ink than a full-bleed background, and the Minimal design prints no fills at all. If the tickets will be handled a lot, let the ink dry before stacking. Laser printers fuse toner and are usually smudge-resistant; inkjet prints may need a minute on coated stock.

Baby shower diaper raffle tickets

The Baby shower preset switches to a wording preset and a softer design without cartoon imagery. Use the title field for the shower name, add “Bring a pack of diapers, get a ticket!” in the small print, and keep the stub to Name only. It is a game for an adult event, not a children’s activity, and the ticket still prints as a normal numbered ticket.

The same preset works for a workplace shower or a family gathering. Print 8-up on cardstock, cut the stubs, and put a box near the gift table. The number on the stub matches the number on the ticket, so the host can draw from the box without sorting.

Check your local fundraiser rules

Raffles are regulated in many places. The rules can cover who is allowed to hold one, whether a licence or registration is needed, what prizes are permitted, and what must be printed on the ticket. They differ by country, state and city, and they can change. Check the current rules for your event before you print, and ask the organiser or a local adviser if the event is unusual.

This page does not run a draw, take entries, or handle money. It only lays out numbered tickets and exports a PDF. The local-rules note stays visible next to the download button so the limit of the tool is clear. For a school or youth event, check the organisation’s own policy as well as local rules.

How this raffle ticket generator works

Everything happens in the browser. The ticket layout, numbering, text and colours are turned into a PDF on your device, and the file is downloaded directly. The event details are not sent to a server. Your last design and numbering settings are kept in this browser so you can return to them, and the share link carries the design and numbering so a colleague can open the same setup. The share link never includes a logo, and it does not include any personal data because the ticket form has none.

The preview is the same layout that goes into the PDF, not a rough mock-up. The page navigator shows what is on each sheet, and the range summary tells you the exact numbers and stack count. That makes it possible to check a 500-ticket run on screen before you commit paper. If the title is too long, the tool shrinks it and warns you rather than letting it run into the number or off the ticket.

If you also need event signs, name tags or a certificate for the winner, the related tools below use the same print-at-home approach. They are separate pages, so you can print the tickets here and then make the door sign without uploading anything.

Updated:

Frequently asked questions

How do I make numbered raffle tickets?

Type an event title, choose whether you want a tear-off stub, and set the start number and how many tickets you need. The preview updates as you type. Download the PDF, print it at 100 percent, cut along the lines, and the tickets are ready for the door or the prize table.

Can I start numbering from any number?

Yes. The start number can be anywhere from 0 to 999,999, and you can add a prefix or suffix such as A- or -R. Zero padding keeps numbers the same width, so 7 becomes 0007. If you continue a book from last year, enter the next number instead of starting again at 1.

What is cut-and-stack numbering?

Each position on the sheet becomes its own consecutive pile after cutting. On an 8-up sheet, the first pile runs 1, 9, 17 and so on, so one pile holds 1–8 in order after the cut. The summary in the tool shows each stack and any blank positions, which makes hand-drawing from a box or bowl much easier.

How many tickets fit on one page?

The template offers 8 or 10 tickets per page on US Letter or A4 paper. Eight per page gives a taller ticket with more room for text; ten per page saves paper. The PDF uses the full page, so the count on screen matches the count on paper.

What paper should I print raffle tickets on?

Ordinary copy paper works for a small event. For a ticket that feels like a ticket, use cardstock around 65–110 lb cover or 176–300 gsm, and choose the printer’s thick-paper setting. A light colour or pastel cardstock can save ink, and a rotary trimmer gives straighter cuts than scissors.

Can I change the event title, date and venue?

Yes. Event title, organiser, prize or description, date and time, venue, an extra line and small print are all editable. The title is required. Long titles shrink to fit and are shortened with an ellipsis only when there is no smaller size left, with a warning in the preview.

Do I need permission to hold a raffle?

Rules vary by country, state and city, and they can cover who may hold a raffle, licences, prize limits and the wording on tickets. Check your local fundraiser rules before you print or hold one. This page only makes the printed tickets; it is not legal advice.

Can I draw the winner here?

No. This is a ticket template, not a draw tool. Print the tickets, cut them, hand out the stubs, and draw by hand from a box or bowl. The numbering summary helps you confirm that the stub in the box matches the ticket in the winner’s hand.