How to print dot paper in four steps
- Set the spacing. Spacing offers 5 mm, 1/4 in, 1/5 in, 4 mm, 7 mm and 10 mm, plus a custom value from 2 to 20 mm. The 5 mm default suits most journals.
- Choose the dot size. Dot size offers Fine 0.3 mm, Standard 0.4 mm, Bold 0.6 mm and Extra bold 1.0 mm, plus a custom value up to 1.5 mm. The dot is capped at half the spacing so neighbouring dots never touch.
- Add bold dots if you need blocks. Bold dots every replaces every Nth dot in both directions with a larger dot. The bold colour is darker, so the pattern is visible at a glance.
- Pick the paper and print. Use Two pages per sheet for an A4 or Letter sheet divided into two smaller pages. Download the PDF and print at 100 %.
Dot spacing and what fits
| Sheet and margins | Spacing | Dots across | Dots down | Total dots |
|---|---|---|---|---|
| A4, 10 mm | 5 mm | 39 | 56 | 2,184 |
| Letter, 0.5 in | 5 mm | 39 | 51 | 1,989 |
| Letter, 0.5 in | 1/4 in | 31 | 41 | 1,271 |
The count includes the dots on both edges. The grid is centred from left to right, and any spare space is split between the two sides. A4 at 5 mm leaves 2 mm at the bottom with the default margins, which is why the summary names the spare space instead of adding a half row of dots. The preview and the PDF use the same fit.
Dot size and tone
The dot diameter is a real printed size, not a screen size. At 0.4 mm, a dot is about 1.1 pt wide, which is visible on plain paper and does not fill with ink on a laser printer. At 0.3 mm, a fine dot is better for small handwriting but may disappear on a rough paper. At 0.6 mm and 1.0 mm, the dots are easy to see across a desk and survive a scan.
Tone is separate from size. Grey is the default: light dots in the minor colour and darker dots in the major colour. Blue and green are easier to distinguish from black ink, and black is best for high-contrast printing. If you print a custom colour, choose a value that is clearly darker than the paper; a very light yellow may not print at all.
Two pages on one sheet
The two-up option prints a landscape sheet with two portrait pages and a dashed cut line. On A4, each half is A5; on Letter, each half is half-letter. The margins apply to each half, so the dots do not run into the cut. Cut on the line after printing, or fold and trim if you do not need a clean edge.
Two-up is useful for a journal insert, a shopping list and a meal plan on one sheet, or for testing a dot size before committing a full page. Set the dot size and bold interval before you turn it on, because the half page has fewer dots and a bold pattern may look different.
Bold dots and block patterns
Bold dots every 5 create a square block of five by five small dots with a larger dot at each corner. That is the pattern used for dot-to-dot puzzles, rangoli and kolam guides, and quick counting grids. Every 4 gives a tighter block; every 10 gives a larger, calmer pattern.
The bold dot replaces the regular dot, so the grid does not get heavier overall. Its diameter is calculated from the dot size and spacing: it is at most 1.5 times the dot size and at most 0.6 times the spacing. That keeps it visibly larger without merging with its neighbours.
Choosing paper and margins
Letter is the default for US and Canadian users; A4 is the default elsewhere. Both are available, along with Legal, Tabloid, A3, A5, B5 and B4. The default margins are 0.5 in on US paper and 10 mm on metric paper. A 10 mm margin is safe for most inkjet and laser printers.
For a journal, A5 is the natural page size. Print a single A5 page if your printer accepts A5, or use two-up on A4 and cut the sheet. For a folder or a clipboard, Letter or A4 with a 15 mm margin gives more usable width. Do not set a margin below 6 mm unless you know the printer can print that close to the edge.
Print it right
- Print at 100 % (Actual size), not Fit.
- Choose Letter or A4 to match the paper.
- Print one sheet and measure the test line before printing a stack.
The test line should measure 2 in on US paper or 50 mm on A4. If it is wrong, the dot spacing will be wrong too. Open Printing tips for browser-specific settings.
Tips and limits
Dot paper is a guide, not a ruler. If you need exact squares for a floor plan or a coordinate plot, use graph paper instead. If you need a page for handwriting, lined paper gives a stronger baseline. Dot paper sits between the two: enough structure to align a page, enough freedom for a drawing.
The PDF does not add a background tint, a border or a logo. That keeps the file small and the printed page clean. Your last settings stay in this browser, and Clear my data removes them. The share link carries only the settings needed to rebuild the page, never the content you write on it.
Updated: