Decide on folded or flat first
Folded tent cards stand on the table without a holder, and they show a name on both sides. Flat cards sit in a small holder or lie on a charger plate. The choice changes the whole sheet: a tent layout prints two faces on one long card with a fold across the middle, while a flat layout prints one face per card.
The Letter tent layout uses a 3.5 × 5 inch card, folded to 3.5 × 2.5 inches, four per sheet. The A4 tent uses a 90 × 120 mm card, folded to 90 × 60 mm, also four per sheet. The flat layouts fit ten cards per sheet: 3.5 × 2 inches on Letter or 90 × 55 mm on A4. All four layouts include cut marks, and the tents include a fold line or edge ticks.
If you are buying cardstock, a 200 to 300 gsm weight stands up well. Score the fold before bending it; a hard fold on thick card without a score tends to crack the surface. A bone folder or the back of a spoon works. For a very casual meal, 160 gsm is easier to fold and still stands.
Build the guest list
The quickest format is one guest per line: name, table, meal, separated by commas. For example, a line might read “Jordan Avery, 1, Chicken”. The name becomes the large line, “Table 1” and “Chicken” become the detail line, and the optional small line below can carry the event name or venue.
For a larger list, paste a CSV with headings. Name, guest, table and meal are recognised, along with menu, entrée, dietary and a few common alternatives. A heading row is detected automatically, so the first guest is not mistaken for a header. Empty rows are skipped, duplicates are counted, and the list is capped at 1,000 cards.
The sort option groups cards by table number while keeping the original order inside each table. That matters when you are laying out a hundred cards on a table and want to work table by table rather than hunting through the alphabet. Blank cards can be added at the end for last-minute guests or for handwriting.
If you only need table numbers, switch the content mode and enter the first and last table. The maker prints TABLE 1, TABLE 2 and so on, one per card, in order. That is useful for a buffet, a workshop or a market stall where each table needs a clear number rather than a name.
Typography and colour
Script suits weddings and formal dinners; serif is a safe classic; sans is cleaner for a casual event or a corporate lunch. The name is fitted to the card width, so a long name is reduced before it is wrapped. The detail line is deliberately smaller than the name, and the small event line is smaller again.
The border can be none, a single rule, a double rule or a small flourish. The accent colour applies to the border and the small decorative details. Keep the text dark; a pale accent on white is hard to read across a table. If you are printing on cream or textured card, test one sheet before running the whole job.
Print, cut and fold
Print at 100 percent or Actual size, never Fit to page. The layout depends on exact card dimensions, and a scaled PDF will not fold in the middle or line up with a pre-cut sheet. Print the test page first: it shows the card outlines and the fold position at the printer’s real scale.
Cut on the crop marks with a trimmer for straight edges. For tents, fold on the printed line so the name is upright on both faces. A stack of folded cards can be pressed under a book for a few minutes to flatten the crease. For flat cards, a slight tilt in a holder often looks better than a perfectly square card.
The PDF is generated on your device. The guest list is not uploaded, and the share link is only created when you ask for it. If the list is confidential, keep the PDF rather than the link.
Updated: