Envelope Template & Envelope Printing

Print addresses straight onto #10, DL, C5, A2 and A7 envelopes with this free printable envelope template — one address or a whole list.

Type #10 starts on a landscape page. The PDF page matches the envelope.

Custom envelope size

Use the outside measurements, 50–400 mm. The long edge becomes the page width unless you choose Portrait below.

Return address

No logo. A logo prints at the top-left, up to 1.5 × 0.75 in.

Delivery address
Print a list (mail merge)

Name, company, address, city, state, ZIP and country columns are matched automatically. The first 1,000 rows are printed.

Print options

Add a delivery address to make the PDF.

Envelope preview

Front 1 / 1
Page 1 of 1

#10 business · 241.3 × 104.8 mm · landscape

Which way do envelopes feed?

Print the feed test. The words TOP-LEFT must be at the top-left of the front when it comes out.

  1. Load one envelope, face up, long edge first. Keep the flap side down.
  2. Print the feed test at 100 % (Actual size), not “Fit to page”.
  3. If TOP-LEFT lands somewhere else, turn the envelope to match, then choose Rotate 180° if needed.

How to print on an envelope in 4 steps

Printing an envelope is mostly a question of orientation. The address is simple; the hard part is knowing which side faces up and which edge goes into the printer first. This envelope template removes the guesswork by making a page that is exactly the size of the envelope, then showing a feed test before you commit to the run.

1. Pick the envelope size. Choose #10, DL, C5, C6, A2, A7, 6 × 9 or another size from the list. If your envelope is not listed, measure the outside width and height in millimetres and enter a custom size between 50 and 400 mm. The PDF page is built at that size, so you have a clean reference rather than a page of A4 or Letter with an envelope drawn in the middle.

2. Type the two addresses. The return address goes in the top-left block and the delivery address in the centre-right block. Up to five lines are used for the return address and up to eight for the delivery address. Empty lines are ignored. The preview shows sample grey text until you type, so you can see the shape of the layout before you start.

3. Run the feed test. Download the feed test PDF and print it on a cheap envelope, or on paper cut to the same size. The page has a bold TOP-LEFT marker. If the marker comes out in the top-left of the front, load the real envelopes the same way. If it is upside down, turn on Rotate 180°. If it is on another edge, turn the envelope in the tray. Every printer tray is different, so this one-minute check saves a wasted box.

4. Download and print at 100 percent. In the browser print dialog choose Actual size, not Fit to page. On Windows the setting may be called 100 percent or Scale: 100. On a Mac it is in the Page Sizing section. If the print dialog only offers “Fit”, download the PDF and open it in a PDF reader that can print at actual size.

Envelope sizes in inches and millimetres

The tool includes the sizes most people actually buy. The table below is a quick reference for the front of the page; the picker also includes #9, #6¾, A6, 9 × 12, 10 × 13, C4 and custom sizes.

Envelope Size in inches Size in millimetres Typical use
#10 business 9.5 × 4.125 241.3 × 104.8 Bills, letters, statements
#9 8.875 × 3.875 225.4 × 98.4 Short letters, notes
#6¾ 6.5 × 3.625 165.1 × 92.1 Personal correspondence
DL 8.66 × 4.33 220 × 110 European business letters
C6 6.38 × 4.49 162 × 114 A6 cards and small mailings
C5 9.02 × 6.38 229 × 162 A5 letters and documents
A2 5.75 × 4.375 146.05 × 111.1 Invitations, greeting cards
A7 7.25 × 5.25 184.15 × 133.35 5 × 7 cards and photos
6 × 9 booklet 9 × 6 228.6 × 152.4 Booklets, catalogues
9 × 12 catalog 12 × 9 304.8 × 228.6 Larger mailings and flats

The long edge normally becomes the page width, because envelopes are wider than they are tall. If your printer will only take a portrait page, choose the Portrait option. The template keeps the address upright on the envelope by rotating the printed content 90 degrees, not by squeezing the layout.

Envelope address format: where each address goes

The return address belongs in the upper-left corner of the front. The delivery address is placed in the centre-right, a little below the middle. The stamp goes in the top-right, and the bottom-right corner is kept free for postal barcodes. On a #10 envelope, the delivery block should sit between about ⅝ inch and 2¾ inches above the bottom edge so it falls inside the USPS read area.

Use the same line order for both blocks: name, company if needed, street address, city and state, ZIP or postcode, and country for international mail. Write the ZIP on the last line with the city and state, not on a separate line. Leave one space between the state and the ZIP. For international mail, print the country name in capitals on the last line.

The optional USPS check in this tool compares the delivery block with the read area, the stamp corner and the bottom-right clear zone on Letter-size envelopes. It warns you when part of the address falls outside the expected area. The Fix position button moves the block to the nearest valid place. The check is a layout aid, not a postal approval, and it is switched off automatically for sizes outside the US Letter range.

Load envelopes the right way

There is no universal “face up” rule that covers every printer. A rear tray, a front cassette and a manual feed slot can all want the envelope a different way. The tray icon or the printer manual is the first place to look, but the feed test is faster and more reliable.

Place one envelope in the tray exactly as the test suggests. Print the feed test. The TOP-LEFT words should appear at the top-left of the front, with the flap on the back. If the words are upside down, turn on Rotate 180°. If they appear on the back, flip the envelope over. If they appear at the top-right, the envelope went in the other way round. Mark the working direction on the tray with a pencil so the next run is easy.

Thick or handmade envelopes may need the rear feed or a straight-through path. Set the printer to its thick-paper or envelope mode, and feed one at a time if the tray skews. A slightly skewed envelope is still usable, but the address will rotate with it.

The mail merge panel turns a spreadsheet into a stack of envelopes. Paste cells copied from Excel, Google Sheets or Numbers, or upload a CSV file. The first row is treated as headings. Common headings such as Name, Company, Address, Address 2, City, State, ZIP and Country are recognised automatically. Each remaining row becomes one envelope page.

Check the row count before you download. Empty rows are skipped, and the status line tells you how many envelopes are ready. The first 1,000 rows are printed in one PDF, which is enough for most mailings and keeps the browser responsive. For a larger list, split it into batches. The data is processed locally; nothing is sent to a server.

If a spreadsheet has dropped the leading zero from a ZIP code, the merge repairs a four-digit US ZIP to five digits and reports it. That is a common problem when a spreadsheet treats ZIP codes as numbers. Review the repaired line before printing if the address is unusual.

An easier route than a word-processor envelope dialog

Word processors can print envelopes, but the dialog often assumes a particular feed direction and hides the page size behind a label list. Changing the return address position, switching from #10 to DL, or adding a logo can mean fighting the template. A browser-based envelope template keeps the page at the envelope size and shows the result as it will print.

This tool also makes the feed test part of the workflow. Instead of printing a full run and discovering that every envelope is upside down, you print one test page, fix the orientation, and then print the stack. The PDF is vector text, not an image, so it stays sharp on an inkjet or laser printer.

If you are mailing a lot of invoices, the invoice generator can make the document and this page can print the envelope. For sheets of labels rather than envelopes, use the address label tool; for a partly used label sheet, the label maker is the better fit.

Tips: smudges, thick envelopes and laser printers

Inkjet ink needs a moment to dry on coated or glossy envelopes. Print a small batch and let it sit for a minute before stacking. Laser printers fuse toner with heat; check that your envelopes are rated for laser printing, because some window films and adhesives bubble in a hot fuser.

Do not print over the flap seam if the envelope is thick. The print head can strike the seam on some inkjets. A rear feed and a straight path usually help. If the envelope is more than about 0.25 inches thick, use a label printed on a sheet and applied to the envelope instead.

Keep the bottom-right corner clear on US mail. A barcode, logo or decorative border in that area can interfere with postal sorting. The preview shows the read area and clear zone when the check is on. Turn the overlay off before printing if you prefer a clean view; the PDF never includes the guide.

Finally, keep the PDF rather than re-creating the job for a reprint. The page size, addresses and orientation are all in the file. If you need to send the same layout to a colleague, the share link carries the settings; addresses are included only when you tick the box, and the logo is never included.

Updated:

Frequently asked questions

How do I print an address on an envelope?

Choose the envelope size, type the return address and the delivery address, then download the PDF and print it at 100 percent or Actual size. Print a feed test first on a cheap envelope or a sheet cut to the same size, so you know which edge goes in first and which side faces up.

What size is a standard business envelope?

In the United States, the standard business envelope is #10, about 9.5 × 4.125 inches or 241.3 × 104.8 mm. In Europe and much of the world, DL is the common business size at 220 × 110 mm. Both are in the size list, along with C5, C6, A2, A6, A7 and larger catalog envelopes.

Where does the return address go?

Put the return address in the top-left corner of the front, about 0.375 inches or 10 mm from each edge. Put the delivery address in the centre-right area, inside the USPS read area for US mail. Keep the top-right stamp corner and the bottom-right barcode clear zone empty.

Which way do envelopes go into my printer?

It depends on the printer and the tray. Most printers accept envelopes face up with the flap side down, but the exact edge varies. Use the envelope icon in the tray and print the feed test: the words TOP-LEFT must appear at the top-left of the front. If not, turn the envelope or use Rotate 180°.

Why did my envelope print upside down?

The envelope was probably loaded the other way round, or the printer driver rotated the page. Turn on Rotate 180° in the print options and run the feed test again. Check that the PDF is printed at 100 percent, because fit-to-page can also change the position.

Can I print envelopes from a spreadsheet?

Yes. Paste a CSV or TSV list into the mail merge panel, or upload a CSV file. Columns such as name, company, address, city, state, ZIP and country are matched automatically, and each row becomes one envelope. The list stays in your browser and is never uploaded.

Can I add a logo to the return address?

Yes. Upload a PNG or JPEG up to 2 MB and it prints at the top-left, up to 1.5 × 0.75 inches. The logo stays in the browser for the current session. It is not included in a share link and it is not saved with the return address.

Will this work for DL and C5 envelopes?

Yes. Choose DL or C5 from the size list and the PDF page is created at that exact size. For a printer that only accepts a portrait page, choose Portrait and the address block is rotated 90 degrees. Test on one envelope before printing a whole box.