How this box template works
A box template, also called a net or dieline, is the flat shape of a box. The panels become the front, back, sides, lid and base; the narrow strips become glue tabs; the tongues tuck into the lid. The tool calculates the net from your inside dimensions and the card thickness, then draws cut, fold and glue lines to scale.
The width of a tuck-box net is the glue flap plus two length panels, one width panel and one more width panel. The height includes two lid panels, two tongues and the box height. The card thickness is added to the panels so the folded box does not come out tight. That is why a 50 mm inside length uses a panel slightly longer than 50 mm.
Inside size, outside size and card thickness
Start with what you need to fit inside the box. If a mug is 90 mm tall, a 100 mm inside height leaves room for padding. The outside will be taller by about twice the card thickness. The summary gives the outside dimensions, which is the number to use when checking a shelf, a drawer or a shipping carton.
Card thickness matters most on small boxes. At 0.4 mm the difference is small; at 1 mm it is visible. The lid needs a little clearance so it slides on without tearing. A clearance of 1 mm is a good starting point for card stock; use 0.5 mm for thin paper and 2–3 mm for thick board.
Tuck box or box with lid
A tuck box is one piece. It folds into a box with a hinged lid and a tongue that tucks into the front. It is fast to make and needs one glue join. It suits gifts, favours, soap, tea and small retail packaging.
A box with a separate lid is a tray plus a lid. The tray has four walls and corner tabs; the lid is slightly larger and slides over the tray. It is sturdier and easier to open and close repeatedly. It suits board games, keepsakes and boxes that will be handled.
Cut, score and fold
Cut on the solid lines with a craft knife and a metal ruler, or with scissors for a small box. Score every fold line before folding: a ruler and an empty ballpoint pen make a clean crease without cutting the card. A bone folder gives a sharper edge on heavy stock.
For a plain box, fold toward the printed side. The printed side becomes the inside, so the fold lines are hidden. For a box with artwork, print on the outside and fold away from the print. The line style changes automatically: dashed for folds toward the print, dash-dot for folds away from it.
Glue and assembly
Apply a thin line of glue to the grey strip, not a puddle. Press the mating panel onto it and hold for about thirty seconds. Wood glue, white craft glue and double-sided tape all work; a glue stick is convenient but weaker on coated card.
For the tray, fold the walls up and wrap each corner tab around the corner. Glue the tab to the inside of the short wall. For the lid, repeat the same steps. Let the glue set before sliding the lid on, or the paper may tear.
Tiling a large net
When the net is larger than one sheet, the tool splits it into tiles with a 10 mm overlap. Print every tile, trim the overlap on one side of each join, and line up the dashed guides. Tape the joins on the back so the front stays smooth. For a big box, trace the assembled outline onto card or board and cut once.
The page-one map shows the tile grid and the order. The tile labels use letters across and numbers down. Keep the pages in order while gluing; a tile turned the wrong way will not line up with the fold lines.
Paper, printer and test line
Use a printer that accepts the card weight you plan to use. Set the paper type to card stock or heavy paper and choose a straight paper path if the printer has one. Score before folding; a thick card cracked along an unscored fold looks messy and weakens the corner.
Print at 100 %. The test line at the bottom should measure 2 in on Letter or 50 mm on A4. If it is wrong, check the print dialog for Fit to page, Scale or Shrink oversized pages and turn it off.
Tips for a clean box
- Measure the item, not the old box.
- Add 1–2 mm to the inside size for a lined or wrapped gift.
- Make a paper mock-up before cutting expensive card.
- Keep the blade vertical; a tilted blade makes a bevel that shows on the fold.
- Label the panels on the inside if the box will be given away.
The PDF contains no ads or website addresses on the net. Your settings stay in this browser, and Clear my data removes them. The share link carries the dimensions and style, not anything you type into the box.
Updated: