This makes address labels, not postage. Buy postage from your carrier or marketplace.
How to make a shipping label
Choose the paper first. A 4 × 6 inch thermal label is the usual choice for a dedicated label printer. Half-sheet labels work on an ordinary inkjet or laser printer, and the “two 4 × 6 on Letter” option lets you print on plain paper and cut the labels out.
Enter the FROM address and the SHIP TO address. The recipient block is the largest element on the label, because it is the part a handler reads first. Paste the address from the order email if you can; retyping is where house numbers and apartment letters get lost.
Add the optional details: your own order or reference number, the weight, the contents and the package count. A barcode is useful when the same order has several boxes, because each label can say “Package 1 of 3”. Handling marks are requests to the people moving the parcel, not insurance.
Print a test page on plain paper at 100 percent. Check that the FROM and TO blocks are inside the label and that nothing is clipped at the edge. If the label is for a thermal printer, confirm the paper size in the printer driver before the first real roll. Download the PDF and print at Actual size.
Tape the label flat, away from edges, seams and the opening of the box. A label that wraps around a corner can lose part of the address or barcode. If the parcel will be exposed to rain, use a carrier pouch or cover the label with clear tape, but avoid taping over a barcode if glare could affect scanning.
4×6 thermal, half-sheet or plain paper?
| Paper | Size | Printer | Labels per page |
|---|---|---|---|
| 4 × 6 thermal label | 101.6 × 152.4 mm | Thermal label printer | 1 |
| Half-sheet, Letter | 215.9 × 139.7 mm | Inkjet or laser | 2 |
| Half-sheet, A4 | 210 × 148.5 mm | Inkjet or laser | 2 |
| Two 4 × 6 on Letter | 101.6 × 152.4 mm each | Inkjet or laser | 2 |
The 4 × 6 layout is designed around the printable area of a typical thermal label, with a small inset so nothing is clipped. A 100 × 150 mm roll is close enough that the same layout fits, but check the first print. Half-sheet layouts use the full page and are split into two labels; the cut-out Letter option places two 4 × 6 labels with space around them for taping.
If you send only an occasional parcel, half-sheets avoid buying a thermal printer. If parcels are a daily task, a thermal printer is faster and produces a label that does not smudge like some inkjet output on plain paper.
What goes on a shipping label (and how to read one)
A label made here has five parts: the FROM address, the SHIP TO address, an order barcode, an information line and optional handling marks. The information line can hold the weight, the package number and the contents. The barcode encodes your own reference, not a carrier’s tracking number.
A carrier’s label contains more. It adds the service, routing codes, a tracking number and a barcode created by that carrier, plus proof that postage was paid. When you read one, start with the two addresses, then the service line, then the tracking number under the main barcode. The routing codes are for the carrier’s network, not for you to retype.
What should a return address include?
A return address needs a name or business name, the street and unit, the city, the state or province, the postal code and the country if the parcel crosses a border. Use the same address you would put on an envelope. If the parcel cannot be delivered, this is where it comes back.
Fragile and other handling marks
FRAGILE, THIS SIDE UP, KEEP DRY and HANDLE WITH CARE are requests to the people handling the parcel. They do not buy extra care, insurance or a different service. Pack as if the marks will be ignored: use enough padding, close the box securely and keep heavy items from moving.
Add an order or reference barcode
The order barcode is a Code 128 symbol for a number you control. It might be an order ID from your shop, an invoice number or a short reference such as ORD-1042. The tool sets the bar height and chooses a module width that fits the label, then snaps the width to whole printer dots when you select 203 or 300 dpi.
A long reference may be too wide for a 4 × 6 label at a readable module size. In that case the number is printed as text instead of bars. Shorten the reference or use a half-sheet, where the barcode area is wider. Always test the finished label with the scanner or phone you will use; a code that looks fine on screen can still be too small on paper.
Batch labels from an orders CSV
The Many orders tab accepts a pasted table or a CSV file. Put one order per row. Useful columns include order ID, name, street address, city, state, postal code, weight, contents, package count and phone. Columns do not have to be in a fixed order, and the header row is used to match them.
A Packages column expands one row into several labels. A value of 3 produces three labels marked “Package 1 of 3”, “Package 2 of 3” and “Package 3 of 3”. The count is capped at 20 so a typing mistake does not create hundreds of pages. Rows with no street address are skipped and listed by row number, which makes a bad export easy to fix.
All rows go into one PDF. The addresses stay in the browser; the file is generated locally and is not uploaded to a server. For a matching document in each box, use the packing slip workflow rather than adding more text to the label.
Thermal printer settings
For a 4 × 6 label, set the paper size to 4 × 6 inches or 100 × 150 millimetres, choose portrait orientation and set scaling to 100 percent or Actual size. Select the printer’s real resolution, usually 203 dpi or 300 dpi, so the barcode module width can be snapped to whole dots. A 203 dpi printer has dots about 0.125 mm wide, which is coarse enough that an unsnapped width can make a barcode look uneven.
Direct thermal printing uses heat-sensitive labels and no ink, toner or ribbon. The print can fade if the label is kept hot, in direct sunlight or against certain plastics. Thermal transfer printing uses a ribbon and generally produces a more durable label. The trade-off is an extra consumable and more setup.
Make a test print before a batch. The test page shows a box at the intended printable size plus rulers, so you can confirm that the driver is not scaling or adding a margin. If the box is consistently short in one direction, the paper size in the driver is probably wrong rather than the PDF.
What this tool does not do
This page does not create postage, a tracking number, a carrier barcode, a pickup request or a customs form. It does not copy a carrier’s label design. Those things belong to the carrier or marketplace that sells the service, and using the wrong barcode can delay a parcel.
It also does not upload or log addresses. The TO field, order fields and pasted rows are kept in the page and are not saved unless you choose to remember the sender. The FROM address is stored only when you tick Remember my FROM address, and Forget removes it.
A short checklist before printing
Confirm that the recipient address is complete, including the apartment or unit. Check that the order number matches the box. If there are several boxes, confirm that every label carries the right package number. Choose the correct paper size, print one test page at 100 percent, and only then print the batch.
Keep the PDF until the parcel is delivered. If a label is damaged, reprinting the same file is faster than recreating the order. If the address changes, edit it and regenerate the label rather than writing over the old one.
Updated: