How to make labels with this label maker
Start with the packet in front of you. The front usually gives two numbers: how many labels are on a sheet and the size of one label. Enter both ideas when you choose a template — for example, 30 labels per sheet, each 1 × 2-5/8 inches. If the packet only says “compatible with Avery® 5160”, the 30-up Letter layout is the one to pick.
Next, choose how the label will be filled. Same mode repeats one design across the sheet. List mode reads a pasted spreadsheet or CSV and puts one row on each label. Numbered mode adds a running number, which is useful for asset tags and boxes. You can change the text, font, alignment, colour, border and padding before printing.
Then make a test print on plain paper. Hold it over a real label sheet against a window and look at the corners of the first and last labels. The outlines should sit inside the die-cuts. If they do not, use the alignment nudge or the measurement fields rather than moving text around by eye.
Finally, download the PDF and print at 100 percent. In a browser print dialog this is usually called “Actual size”; in Adobe Acrobat it appears under Page Sizing & Handling. Turn off “Fit to page”. A fit-to-page setting can shrink the sheet by several percent, which is enough to make the bottom row miss by a visible margin.
Choose your label sheet (label templates by size)
Label sheets are sold by count, label size and paper size, and those three numbers matter more than the brand on the box. The table below shows common layouts and what they are usually used for.
| Layout | One label | Sheet | Typical use |
|---|---|---|---|
| 30-up | 1 × 2-5/8 in (25.4 × 66.7 mm) | Letter | Addresses, product labels, return labels |
| 20-up | 1 × 4 in (25.4 × 101.6 mm) | Letter | Mailing labels, narrow product labels |
| 10-up | 2 × 4 in (50.8 × 101.6 mm) | Letter | Larger address labels, warnings, bin labels |
| 6-up | 3-1/3 × 4 in (84.7 × 101.6 mm) | Letter | Shipping, inventory and larger product labels |
| A4 21-up | 63.5 × 38.1 mm | A4 | Address labels outside the US and Canada |
| A4 14-up | 99.1 × 38.1 mm | A4 | Wider address labels on A4 paper |
The preview shows the whole sheet, including the gaps between labels, so you can compare the layout with the packet. The selected template also names the paper size. A Letter PDF printed on A4, or the reverse, will not line up even if the label count looks similar.
Avery® is a registered trademark of its owner. PrintableMate is not affiliated with or endorsed by Avery.
Your sheet isn’t listed?
Measure the sheet once: top margin, side margin, label width, label height and the distance from one label to the next across and down. Enter those numbers in the custom sheet form. The tool checks that the rows and columns fit inside the page and gives the exact sum when they do not. Save the sheet and it appears under My sheets for next time.
Start from a design
The starter cards are there to remove the blank-page problem. Plain text is the default and prints no placeholder text. Product label sets up a name, a short detail line and an optional QR area. Pantry jar uses larger type and a light border. Storage bin uses condensed type for a long shelf label. Price tag adds a Code 128 area for a SKU. Asset tag switches on numbered mode and a code that follows the same number.
A starter replaces the text, font, alignment, code, border and padding. It keeps the sheet, start position and copies, so you can try several looks without losing your place.
Custom labels for your products
For a small shop, a product label often needs three things: the product name, a short description and a link. Keep the name readable at arm’s length, put the detail in a smaller line, and use a QR code only when there is a page worth opening. A logo can sit left, right or above the text. The tool does not create nutrition, ingredient or other regulated labels; those need wording and checks that a general label maker cannot supply.
Add a logo, a barcode or a QR code
Logos can be PNG, JPEG or WebP and are resized for the preview. A barcode or QR code is drawn from the data you enter, not from an image, so the bars stay sharp in the PDF. Code 128 is the practical choice for internal SKUs, asset tags and order numbers. Retail UPC and EAN numbers should only be printed if your business is licensed to use them. For a code on its own, the barcode generator gives more symbologies and size controls.
Test a barcode with a phone before printing hundreds of labels. A QR code needs enough space between its modules to be read by a camera, and a barcode needs a quiet zone at each side. The preview shows the size, but only a real print confirms how the ink spreads on your paper.
One design, a list, or numbered labels
Same mode is the fastest route for a sheet where every label is identical. List mode is for names and addresses: paste cells from a spreadsheet, map each column to a line, and remove rows you do not want. Numbered mode is for sequences such as equipment IDs or box numbers. It supports a prefix, a start value, a step, a suffix and a fixed width, so ASSET-0007 follows ASSET-0001 when the step is two.
Lists are parsed in the browser and are not uploaded. If you use a share link, only the design settings are included unless you deliberately choose to include typed list text.
Make labels line up: test print and alignment fix
There are two different alignment problems. An offset moves every label by the same amount in the same direction, usually because the printer grabs the sheet slightly to one side. Drift gets worse toward the bottom or across the page, which usually means the PDF is being scaled. Check a known distance on the test print, such as the 100 mm ruler, before changing anything.
For a whole-sheet offset, nudge the drawing in 0.1 mm steps or enter the measured distance from the paper edge to the first label. For drift, turn off scaling in the print dialog and make sure the selected paper size matches the PDF. A used sheet is a separate issue: set the start position to the first free label so the remaining labels continue in the correct order.
Do you need a label maker machine?
| Method | Best for | Consumables | Colour |
|---|---|---|---|
| Sheet labels and your printer | Full sheets, addresses, product runs | Label sheets | Yes, on inkjet or laser |
| Handheld label maker | Single strips, cables, shelves | Tape cartridges | Usually one colour |
| Thermal label printer | Many 4×6 parcel labels | Thermal rolls | Usually one colour |
A sheet label workflow is often cheaper for batches because you buy one pack and print only what you need. A handheld machine is convenient for a single cable flag or file tab. A thermal printer earns its space when parcels are a daily job and a 4×6 label is the normal output.
How this label maker works
The preview and the PDF come from the same layout engine. Positions are calculated in physical units, not screen pixels, so the PDF places each label at its measured position on the page. Text is fitted to the available box and can shrink to a minimum size rather than spilling outside the label. Barcodes are vector shapes, and images are embedded at a sensible resolution.
Nothing is uploaded. Saved designs and custom sheets stay in this browser, and you can clear them from the page at any time. The tool works without a network connection after the page has loaded.
Tips and limits
Use dark text on a light label, especially for barcodes and small type. Keep body text at 8 points or larger when the label will be read by hand, and avoid very light grey on white. Matte sticker paper accepts ink more predictably than glossy paper, and feeding one sheet at a time reduces jams and skew.
The editor supports up to six lines per label, sizes from 6 to 72 points, and a copy count up to 500. Very long lines are shortened with an ellipsis and flagged, rather than being allowed to print over the edge. If a label is too small for everything you want to say, move a detail to a second label or choose a larger layout.
Updated: