Graph Paper

Print graph paper with exactly the grid you need – 1/4 inch, 5 mm, 1 cm or any custom size – on Letter, A4 or A3 as an exact-scale PDF.

Grid
Paper and margins
Line colour and weight
Header and output

Print at 100 % (Actual size). Nothing is uploaded.

Page preview

Letter portrait

How to print graph paper in four steps

  1. Pick the square size. Square size covers the common US and metric grids: 1/4 in, 1/5 in, 1/8 in, 1/10 in, 1/2 in, 1 in, 1 mm, 2 mm, 5 mm and 1 cm. Use Custom when you need a precise millimetre value for a template.
  2. Choose the bold interval. Bold line every sets the darker lines that help you count. Four squares per inch with a bold line every 4 is the familiar quad paper. A 5 mm grid usually has no bold lines, while a 1 mm grid often uses three levels.
  3. Set the paper and margins. Letter is the default for US and Canadian users; A4 is the default elsewhere. Margins of 0.5 in or 10 mm are safe for most printers. Do not go below 0.25 in or 6 mm if you want the border to print.
  4. Download and print at 100 %. Open the PDF, check that the test line measures 2 in or 50 mm, then print the rest. The preview and the PDF use the same whole-square layout.

What the grid guarantees

The grid uses whole squares only. The tool calculates how many squares fit inside the margins, centres the block from left to right, and starts it at the top. Any spare space is named in the summary, so a 5 mm grid on A4 reports 2 mm at the bottom rather than hiding a thin strip. This matters when you transfer measurements from a plan: a half square at the edge is harder to count than a clean border.

The PDF is vector, not a screenshot. Lines stay sharp at any print resolution, and the page is exactly Letter, A4 or the size you selected. One square is exactly the spacing you chose, which is why the test line belongs on the same sheet. If the line is correct, the grid is correct.

Choosing a grid for the job

Woodworking and floor plans usually work in 1/4 in, where one square can stand for one foot. A Letter sheet then holds a 30 by 40 ft plan. Quilting, cross-stitch and knitting charts often use 10 squares per inch or a 1 cm grid; bold lines every 5 or 10 make counting rows easier. Engineering calculations often use 1/5 in with bold lines every 5 squares and a name-and-date header. Maths and lab plots benefit from Coordinate axes and numbers, and game maps or pixel art work well on a 1/2 in or 1 cm grid.

For handwriting, a 5 mm grid is a good middle ground. A 1/4 in grid gives more room per square but fewer squares across the page. If you are printing a template that must match a physical object, measure the object, divide by the number of squares you want, and enter that value under Square size. Check the result with a ruler before printing a large batch.

Line colour, weight and bold lines

Grey is the default because it sits behind pencil and ink without competing. Blue and green are easier to distinguish from black pen marks, and orange is useful for a single planning sheet. Minor weight controls the fine lines; Bold weight controls the major lines and the border. Hairline is 0.25 pt, Light 0.35 pt, Regular 0.5 pt and Bold 0.75 pt.

Keep the fine weight at Light for everyday printing. A hairline grid can disappear on a laser printer, especially on recycled paper. If you plan to scan the sheet, a regular weight scans more reliably. Bold lines every 4 or 5 are enough for most counting; making every line bold defeats their purpose.

Axes, labels and scale numbers

Coordinate axes and numbers adds an x axis and a y axis through the centre grid line, with arrowheads and tick labels. Labels are placed every square by default; a wider interval such as 5 or 10 squares keeps a large sheet readable. The origin is labelled 0, and positive numbers run right and up. This is the setting to use for plotting functions, recording lab data or teaching coordinates.

On a 1 mm grid, Centimetre scale numbers can mark the top and left edges every 10 mm. It is a quiet way to keep a centimetre structure without a heavy line. If the numbers crowd the drawing, turn the scale off and keep three-level lines instead.

  1. Print the PDF at 100 % (Actual size), not Fit.
  2. Choose the paper that is in the tray: Letter or A4.
  3. Print page 1 on plain paper, then hold it against a window over the next sheet before printing a batch.

The test line in the bottom margin should measure exactly 2 in on US paper or 50 mm on A4. If it is long or short, the printer is scaling the page. Check the driver setting and try again. For more help, open Printing tips in the tool.

Tips and limits

Keep margins at 0.25 in or 6 mm or more; most printers cannot print to the paper edge. A 1 mm grid uses more ink than a 5 mm grid, so print a sample before a long run. The same settings can be printed double-sided; the grid does not shift from page to page. If you need a grid on both sides, print two copies rather than relying on show-through.

The tool does not add a title block or a logo. Use the header title for a short label, or leave it blank and write on the sheet. Your data stays on the device, and the share link contains only the settings needed to rebuild the page.

Updated:

Frequently asked questions

How do I print graph paper at the correct size?

Choose your paper, keep the default margins, and download the PDF. In the printer dialog set Scale to 100 % or Actual size, not Fit to page. Print the test line first: on Letter it should measure 2 in, and on A4 it should measure 50 mm. If the line is short, the printer is still shrinking the page.

What is the difference between 1/4 inch and 5 mm graph paper?

A 1/4 inch square is 6.35 mm, so it is slightly larger than a 5 mm square. US and Canadian users usually expect 1/4 inch, which gives 30 by 40 squares on a Letter sheet with half-inch margins. Metric users usually expect 5 mm, which gives 38 by 55 squares on A4 with 10 mm margins.

Can I make graph paper with a bolder line every five squares?

Yes. Use Bold line every and choose 2, 4, 5, 8 or 10 squares. The bold lines are drawn in the darker colour and at the heavier weight, while the rest stay light. Bold lines every 4 suit quarter-inch paper; every 5 suits 5 mm paper; every 10 suits a 1 mm grid used for maths.

How do I print coordinate-plane graph paper with an x and y axis?

Turn on Coordinate axes and numbers. The tool draws the axes through the middle grid line, adds arrows, and labels the ticks. Axis labels appear every square by default, or you can set a wider interval. The origin is marked 0, and the grid stays whole and centred behind the axes.

What is three-level graph paper?

Three-level mode is made for a 1 mm grid. Lines at each millimetre stay hairline, lines every 5 mm are medium, and lines every 10 mm are bold. It gives you a fine grid for detail with a clear centimetre structure for counting, without printing every line at the same weight.

Which paper sizes are available?

The tool prints Letter, Legal, Tabloid, A3, A4, A5, B5 and B4 in portrait or landscape. Letter and A4 are the usual choices. A3 and Tabloid give a larger drawing area for plans, quilting layouts and wall charts. The PDF page is the size you choose, not a cropped image of a page.

Does the tool work offline and keep my settings private?

Yes. The grid is drawn in your browser and the PDF is built on your device. Nothing is uploaded. Your last settings are stored in this browser, and Clear my data removes them. A share link carries the grid settings in the address so another person can print the same page.